Epoxy flooring · Hervey Bay & Wide Bay
Garages, sheds, workshops and patios across Hervey Bay, the Fraser Coast and the wider Wide Bay. All concrete surfaces, diamond ground first, every time — a floor built on proper preparation, quality workmanship and a finish made to last.
How it’s done
A slab straight off the builder has a hard, closed surface with curing compound sitting in it. Roll a coating onto that and it sits on top instead of keying in. That’s the floor you see flaking off in sheets three summers later.
We grind every floor with diamonds until the concrete is open and clean, then chase out the cracks, fill them, and cut in the edges properly. The coats only go down once the slab underneath is right.
How a floor runs
Diamond grinding takes the slab back to clean, open concrete. Curing compound, old paint and sealer all come off.
Cracks chased out and filled, holes and pitting patched, joints treated. This is the part that decides how long the floor lasts.
Basecoat down, flake broadcast into it, then scraped back and sealed with the topcoat. UV stable if it’s going outside.
Recent work
Garages, sheds and outdoor areas around Hervey Bay and the Fraser Coast.
More services
Same prep, different system on top.
Bathrooms, wet areas, balconies and retaining walls. Membranes, polyurethanes and cementitious coatings. All applied over properly prepped substrates, with bond breakers and fillets where they belong.
A premium metallic epoxy system creates a stunning, one-of-a-kind finish with rich colour, depth and a unique 3D marbled effect. Designed to turn garages, showrooms and feature spaces into something that stands out.
Food-safe, wash-down epoxy for commercial kitchens, bar areas and cold rooms. Built for hygiene standards and daily traffic.
Jill Dale
Reasonable priceJust love my garage floor, so bright and clean. Seth and Tony did an amazing job. They are very professional and experienced in their craft. They were punctual and very polite. They took the time to explain the process to me. I highly recommend them to anyone requiring epoxy flooring. I will definitely use them again if the need arises. Thanks guys, great job.
Lakeview Springs Yoga Room
Great job so professional. Had exterior concrete paths and boat parking area done in expoxy. Looks amazing. Thanks Seth & Tony, would highly recommend.
Katherine Emery
Seth and his team are professional, reliable and pay close attention to detail. We highly recommend Seth for both waterproofing and epoxy flooring. We will definitely use this team again in the future.
Thank you so much Kathrine, your place came up a treat!
Questions
Cost, timing, and why floors fail.
Epoxy flooring is priced on square meterage and how much work the slab needs first, so we measure and quote on site.
A clean, flat, near-new slab costs less to do than one with cracks, oil stains, old paint or a pitted surface, because the prep is where the hours go. Give us the rough size of the garage and a photo of the floor and we’ll get you a fixed price.
Most standard double garages are a two to three day job on site.
Day one is diamond grinding and crack repair, then the coats go down over the following days with cure time between them. You can usually walk on it after about 24 hours, but leave it around a week before you park a car on it or drag anything heavy across it. Heat and humidity change those numbers, so we’ll give you the real ones for your job.
Only if the prep was wrong. Coatings don’t fail because the epoxy was cheap — they fail because they were rolled onto a slab that was never opened up properly.
We diamond grind every floor back to clean, sound concrete so the coating has a mechanical key to bond into. We don’t acid etch and we don’t go over the top of someone else’s failing paint job without taking it off first.
Yes, but the old coating has to come off first.
We grind the existing paint or sealer back, deal with whatever’s underneath it, then start again. It adds time to the job, so it’s worth mentioning when you ring so the quote is right the first time.
A smooth gloss floor can be, which is why we don’t use one everywhere.
Flake systems already have texture in them, and for outdoor areas, patios, pool surrounds and anywhere that gets hosed down we broadcast a finer aggregate into the topcoat to lift the grip. Tell us how the area gets used and we’ll match the finish to it.
Yes — patios, alfresco areas and paths all take a coating, provided the topcoat is UV stable.
Standard epoxy chalks and yellows in Queensland sun, so outdoor work gets a UV-stable topcoat over the top. That’s the difference between a patio that still looks right in five years and one that goes patchy in two.
Send through the rough size and a photo of the slab as it is now. We’ll come out, measure it and give you a fixed quote.
Get a quote
Rough square meterage, what’s on the slab now, and when you’d like it done.